Victor KachiLearn How To Unbrick Your Infinix Hot 2 X510 Here
Every android can get bricked, it all depend on how you use it. I will show you how you can unbrick your bricked infinix hot 2 (Android One) if it get brick or has already gotten bricked.
VCom Drivers - download it here
=> Infinix Hot 2 X510 stock rom - download it here
=> SP Flashtool - download it here
Steps Involved
==>Install VCOM driver - For Window 8 users see guide here
1. Extract the downloaded vcom driver.
2. Go to device manager>click action>click add legacy hardware
3. Under welcome to add new hardware click next
4. Select advanced option and click next
5. Select ‘show all devices’ and click next.
6. Click have disk
7. Browse to your vcom extracted folder and select the driver setup up file and click
open, then ok.
8. Select Mediatek preloader usb vcom driver and click next.
==>SP FlashTool
1. Navigate to the SP flash tool folder
2. Run the SP flash tool.exe as admin
3. Click on scatter loading. Navigate to the infinix hot2 rom folder and select the " MT6580_Android_scatter.txt "
4.Thenchoose
Firmware Upgrade >>>Then click on download
==>Make sure your bricked hot2 is connected to your computer at this point while it’s closed
==>Wait until the process is complete 100% and you get something like the image below
After the confirmation, close your flashtool and disconnect your phone then power it on and see the magic.
Good luck guys in unbricking your device.
credits: Yomiprof.com
Requirements
VCom Drivers - download it here
=> Infinix Hot 2 X510 stock rom - download it here
=> SP Flashtool - download it here
Steps Involved
==>Install VCOM driver - For Window 8 users see guide here
1. Extract the downloaded vcom driver.
2. Go to device manager>click action>click add legacy hardware
3. Under welcome to add new hardware click next
4. Select advanced option and click next
5. Select ‘show all devices’ and click next.
6. Click have disk
7. Browse to your vcom extracted folder and select the driver setup up file and click
open, then ok.
8. Select Mediatek preloader usb vcom driver and click next.
==>SP FlashTool
1. Navigate to the SP flash tool folder
2. Run the SP flash tool.exe as admin
3. Click on scatter loading. Navigate to the infinix hot2 rom folder and select the " MT6580_Android_scatter.txt "
4.Thenchoose
Firmware Upgrade >>>Then click on download
==>Make sure your bricked hot2 is connected to your computer at this point while it’s closed
==>Wait until the process is complete 100% and you get something like the image below
After the confirmation, close your flashtool and disconnect your phone then power it on and see the magic.
Good luck guys in unbricking your device.
credits: Yomiprof.com
Tap to Comment
Join Our Telegram Channel
Warning ⚠
Entclass Blog and its contents are protected by COPYRIGHT LAW (DMCA) with high-priority response rate. Reproduction without permission or due credit link back will cause your article(s) to be removed from search engines and disappearance of Ads on that page if monetized with Adsense.
Copy the link below and Share with your Friends:
About Entclass Blog
Entclassblog.com Is A Top Tech Blog That Provides Free And Cheap Browsing Cheats On Mtn, 9mobile, Glo And Airtel, Tweaking Guides And Tech News.
Newer Posts
Newer Posts
Older Posts
Older Posts
Comments